Apex Customs Pre-Wash Foaming Kit (*)

The Apex Customs Pre-Wash Foaming Kit consists of:

• 1 x Apex Customs Pump Foamer
• 1 x BILT HAMBER TOUCH-LESS 5L OR 1 x P&S Frostbite Surface Cleanse High PH Snow Foam - 946ml OR 1 x GTECHNIQ W4 Citrus Foam Pre-Wash PH Neutral - 1L

The Apex Customs Pump Foamer is a professional grade large pump displacement sprayer and atomiser, designed to produce a consistent and lush foam from either a concentrated or diluted soap mixture for cleaning purposes. This is especially useful for applications where there is no access to a continuous supply of water or a hose.

Results are enhanced if the cleaning reagent used contains foaming agents which help produce a richer foam consistency while reducing the amount of detergent required.

User manual here

Note: 

1. Always depressurize the chamber after use to prevent wear on the seals. This is essential to prevent leaks and failure at the seams particularly the base of the unit. Failure to do so will void the warranty of this product.
2. Also recommended to empty the contents and rinse with water after use to prevent clogging of the nozzles.
3. You can also adjust how thick or patchy you would like the foam to be by removing the felt filters and adding spacers that are included in the unit from the factory. Refer to the image below:

Made in Italy.

Warranty = 12 months

Technical Specifications:

Bilt Hamber Laboratories premium car care products from THE UK

• TOUCH-LESS is our new eco-friendly pressure-washer, pre-clean, snow foam which can be applied by pump spray, foam cannon or foam gun.
• Applied at typically a 4% PIR this bio-degradable sugar-based product provides truly exceptional levels of cleaning of automotive paintwork.
• Unlike other petrochemical-based cleaners, TOUCH-LESS is free-and-easy rinsing, easing the effort of subsequent bucket washes and massively helping post-treatments bond.
• TOUCH-LESS also contains corrosion inhibitors. Packed in 5 litre PH:10-11, contains no phosphates, solvents, NTA, or caustic soda.

How To Use
TOUCH-LESS may be applied with trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate should be 2% PIR (Panel Impact Ratio) and up to 5% for very dirty vehicles. 

FROSTBITE Surface Cleanse Snow Foam delivers stunning results with every wash. P&S’s advanced formula is a bump up on the pH scale from neutral, to aid in the cleaning process to penetrate deep into crevices, lifting away dirt, road salt, and other contaminants, leaving the vehicle sparkling clean. The rich, dense foam generated by FROSTBITE clings to the surface, effectively loosening and encapsulating dirt for effortless rinsing.

• High Foaming, High Lubricity Snow Foam
• High pH Snow Foam
• Foam Cannon Compatible
• Fresh Floral Fragrance
• Premium Quality

Directions for Use:

• Rinse the vehicle thoroughly to remove loose dirt and debris.
• Dilute FROSTBITE at a ratio of one part snow foam to ten parts water or customize to preferred level of foam.
• Apply FROSTBITE to the entire exterior surface of the vehicle.
• Ensure complete coverage for optimal cleaning results.
• Allow the foam to dwell on the surface for a few minutes, allowing it to loosen dirt and grime.
• Perform contact wash if needed.
• Rinse vehicle thoroughly with water.

W4 Citrus Foam is a pH neutral formula that removes hard to shift grime, without damaging sealants, coatings or waxes.

It combines an effective citrus degreaser with a strong foaming agent making it tough on road grime and bug splatter, but kind to waxes and coatings.

It can be used at a dilution of up to 1:400 through a foam lance, or up to 1:25 through a pump sprayer.

Features & Benefits:

• Removes road grime easily
• Non-caustic formula
• 100% biodegradable
• pH Neutral

Storage and use:

• Keep out of direct sunlight
  
• Allow the foam to dwell on the surface for 5 minutes and then rinse thoroughly
• W4 can also be used with a pump sprayer at a dilution of 1:20
• Do not allow the product to dry on the surface