Unit price per
Combing MTM Hydro's Italian-made PF22 foam cannon and the robust BAR ST-2300 short trigger spray gun with integrated stainless swivel which is made in Germany gives you an complete premium Foam Kit that rivals the standard MTM Magnum28 Foam Kit but at a fraction of the price.
Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running. The snub style Magnum28 Kit allows you to fit in tight spaces when cleaning and eliminates reaching 40"" away to adjust your cannon settings.
The MTM Hydro PF22 launched in 2017 as the latest and greatest foam cannon to hit the world stage. The PF22 offers both, adjustable fan blades, and a two-stage nozzle allowing you to spray vertically and horizontally.
By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof, or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output.
This allows the internal agitator to create a dense foam that is stickier than the Chinese knock off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.
Included items:
Specifications:
MTM PF22 Foam Cannon Valued $139.90
BAR ST-2300 Short Trigger Gun with QC adapters - Valued $124.90
Note:
The short trigger gun comes standard with a 3/8" QC plug exit. To integrate this kit with a M22 female hose connector which is standard across most pressure washers such as ones from Kranzle; you will need to purchase this adaptor which is a 3/8" QC coupling to M22 male thread adapter to suit.
PF22 Foam Cannon
The full spectrum of ratings is not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- For example, 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of the bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.
| Value |
Rated 4 out of 5
|
Works well, built well, well priced.
| Value |
Rated 4 out of 5
|
|---|
Firstly the gun. Although a higher tier spec with the swivelled stainless steel fittings, it did leak on initial start up where the swivel attaches. I used some plumbers tape to reseal fitting, but have some handy if you're looking to purchase. The swivel action also becomes much more rigid once pressure is applied, so don't expect it to free spin. Secondly, the foam cannon is the best I've used. The clicking graduations on the dial with hard stops at either end feels premium, as does the notched guides that feel satisfyingly tactile.
| Value |
Rated 4 out of 5
|
|---|---|
| Performance |
Rated 4 out of 5
|
Was a good product. Super high quality no issues produces shaving cream like foam with gtechnic soap
| Value |
Rated 4 out of 5
|
|---|---|
| Performance |
Rated 5 out of 5
|
WOW, having used various other branded foam guns this one kills the rest, well balanced, perfect foam and matched with the BAR Short trigger guns it’s unbeatable.
So easy to use, feel like a pro even though I’m an amateur. Dealing with the Detail Store was great, awesome communication and very prompt service. The Detail Store are my go to store for all my detailing needs for this day on.
Keep up the great work guys and thank you for a very professional and great service. AAA Rating from me 👍🏻👌🏻
| Ease of Use |
Rated 1 out of 5
|
|---|---|
| Value |
Rated 5 out of 5
|
Solid built quality. Unfortunately, the connections needed tightening and redo of teflon tape as there were some major leaks. Otherwise would have given it 5 stars!
| Ease of Use |
Rated 1 out of 5
|
|---|---|
| Value |
Rated 4 out of 5
|
Hi Rohit, thanks for taking the time to leave a review. We have investigated from our end and there is no product issue that would be the cause, just the fittings need to be tightened. Your feedback will also be passed onto our technical team to ensure that the fittings are tightened too.
